Group Discussion Working from Home:

Lecture: Feet and Inches

Simple Studio

• Open a new rhino file with “Inch as Unit” or “Options – Units – Inch”
• Set Dimension to Foot-Inch Architectural (Options – Annotation – Dimensions)
• Build 30’x20’x1′ floor plate

• Build 15’x15’x1′ floor plate and move it up, 8′ apart from first floor plate

• Build stairs.  Stair plates 11″x36″x2″

• Copy stair plates with 7″ of riser height

• Turn the stairs to get 36″ landing clearance
• Build exterior wall with 6″ of thickness with 20′ of height using Slab Tool
• Cut the wall for pitched ceiling (lower side 6′ below)
• Create Roof with 6″ of thickness, 24″ of overhang on short side 12″ on long side
• Create bathroom walls with slab tool – 5’x8′
• Doors opening with Boolean difference 3′ wide 7′ tall
• Create door 3’x7’x2″
• Create door for bathroom
• Create a window opening @ 4’x3′
• Create window frame using slab tool 2″x2″
• Create glass window pane @ 1-/2″
• Create Corner window
• Create an window by the stairs
• Create sliding door opening @ 12’x7′
• Change lens length from 50mm to 25mm – right click “perspective tab” – viewport properties – lens length
• Render interior views with materials

50 objects – White Board Session

50 objects – go measure in 20 minutes

Each of you should have a measuring Tape, create sketches of objects around you and add dimensions to the sketch.

Upload the image on this page

Assignment 10.0

• Build 50 objects render in groups of 10

Assignment 10.1

• Put 50 objects into Tiny House
• Render 4+ views using Rhino Render
• Upload photos on the website