Assignment 4.0 Halftone Plate

Using Lasercutter, create 10×10″ panel using plexiglass.  The pattern should be based on your filed condition

Assignment 4.1 Facet Panel

Using Canford Paper, create 10x10x2″ facet tile using Pepakura Designer.  Find a relationship between Halftone Plate and Facet Panel .  Use Scale figure.

CNC Milling Tutorial

@2:30

at Laser Lab

Snohetta / Norwegian Wild Reindeer Centre Pavilion

http://www.dezeen.com/2011/11/01/norwegian-wild-reindeer-centre-pavilion-by-snohetta/

CNC Tile Lecture

http://www.dezeen.com/2006/12/07/zaha-hadid-furniture-exhibited-in-new-york/

CNC Tile

• 5x5x2″ CNC tile
• Add sides and bottoms with dupEdge and Loft
• Create closed polysurface
• Compile 4 tiles and create a file
• Export as .stl

5pm Penny will visit the class

Midterm Deliverables for DP2

Examples

1/2”=1’ facade detail model using digital fabrication methodology you learned in the class.  Approximately 12″x12″x4″

Assignment 5.0 CNC tile

1. Create foam milling model.
2. Bring the model to next class.
3. Take 2+ photos of the model and upload images to your page.

Assignment 5.1 midterm model 70% done

• Sketch
• Process plan
• Test pieces
• First draft